View LOR971_716021.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CHIPLED LO R971, LY R971
Besondere Merkmale * Gehausetyp: 0805 * Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,25 mm x 0,8 mm * Wellenlange: 590 nm (gelb), 605 nm (orange) * Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160) * Technologie: GaAsP (gelb, orange) * optischer Wirkungsgrad: 1,5 lm/W (gelb), 1,5 lm/W (orange) * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 4000/Rolle, o180 mm Anwendungen * Informationsanzeigen im Innenbereich * optischer Indikator * Flache Hinterleuchtung (LCD, Handy, Schalter, Display) * Spielsachen
Features * package: 0805 * feature of the device: extremely small package 2.0 mm x 1.25 mm x 0.8 mm * wavelength: 590 nm (yellow), 605 nm (orange) * viewing angle: extremely wide (160) * technology: GaAsP (yellow, orange) * optical efficiency: 1.5 lm/W (yellow), 1.5 lm/W (orange) * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 4000/reel, o180 mm
Applications * indoor displays * optical indicators * flat backlighting (LCD, cellular phones, switches, displays) * toys
2001-03-05
1
LO R971, LY R971
Typ Emissionsfarbe Farbe der Lichtaustrittsflache Color of the Light Emitting Area Lichtstarke Bestellnummer
Type
Color of Emission
Luminous Intensity IF = 20 mA IV (mcd) min. typ. 6 6 2.8 2.8
Ordering Code
LO R971 LY R971
orange yellow
colorless diffused colorless diffused
Q62702-P5180 Q62702-P5181
Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %.
Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity group.
2001-03-05
2
LO R971, LY R971
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current tp = 10 s, D = 0.1 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption Symbol Symbol Wert Value - 30 ... + 85 - 40 ... + 85 + 95 25 (orange) 20 (yellow) 0.1 Einheit Unit C C C mA A
Top Tstg Tj IF IFM
VR Ptot
5 65
V mW
Warmewiderstand Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lotpad Junction/solder point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2)
800 450
K/W K/W
2001-03-05
3
LO R971, LY R971
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange 1) Dominant wavelength 1) IF = 20 mA Spektrale Bandbreite Spectral bandwidth IF = 20 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage 2) IF = 20 mA Sperrstrom Reverse current VR = 5 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 20 mA
1)
Symbol Symbol LO (typ.)
Werte Values LY 589 610
Einheit Unit nm
peak dom
(typ.)
605
590
nm
(typ.)
35
40
nm
(typ.) (typ.) (max.) (typ.) (max.) (typ.)
2
160 2.1 2.5 0.02 100 0.11
160 2.2 2.5 0.02 100 0.11
Grad deg. V V
VF VF IR IR TCpeak
A A
nm/K
(typ.)
TCdom
0.06
0.08
nm/K
(typ.)
TCV
- 1.6
- 1.7
mV/K
(typ.)
opt
1.5
1.5
lm/W
Wellenlangengruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelength groups are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and an accuracy of 0.1 V.
2)
2001-03-05
4
LO R971, LY R971
Relative spektrale Emission Irel = f (), TA = 25 C, IF = 20 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve
100 %
OHL00083
I rel
80
V
60 yellow 40 orange
20
0 400
450
500
550
600
650
nm
700
Abstrahlcharakteristik Irel = f () Radiation Characteristic
40 30 20 10 0
OHL00408
1.0
50
0.8
0.6 60 0.4 70 0.2 80 90 100 1.0
2001-03-05
0
0.8
0.6
0.4
0
5
20
40
60
80
100
120
LO R971, LY R971
Durchlassstrom IF = f (VF) Forward Current TA = 25 C
10 2 mA
OHL00074
Relative Lichtstarke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 C
10 1
OHL00076
IV IV (20 mA)
10 0 yellow orange
IF
10 1
10 0 orange yellow
5
10 -1
10 -1 10 -2 5 orange yellow 10 -3 1 1.4 1.8 2.2 2.6 3 V 3.4 10 -2 -1 10 5 10 0 5 10 1 mA 10 2
VF
Maximal zulassiger Durchlassstrom IF = f (TA) Max. Permissible Forward Current
40 mA 35
OHL00077
IF
Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 20 mA
2
OHL00079
IF
30 25 20 15 10
orange
IV IV (25 C)
1.6 orange yellow 1.2
yellow
TS TA
0.8
0.4
5 0
TA temp. ambient TS temp. solder point
0 20 40 60 80 C 100
0 -20
0
20
40
60
C 100
T
2001-03-05 6
TA
LO R971, LY R971
Mazeichnung Package Outlines
o0.6 (o0.024) o0.4 (o0.016) Cathode mark
1.35 (0.053) 1.15 (0.045)
0.4 (0.016) 0.2 (0.008)
0.9 (0.035) 0.7 (0.028)
1.25 (0.049) 1.05 (0.041)
2.1 (0.083) 1.9 (0.075)
1.4 (0.055)
1.2 (0.047)
0.5 (0.020)
0.3 (0.012)
Cathode mark Soldering terminal may flow in x, y direction
GEOY6024
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Gewicht / Approx. weight: 3.2 mg
2001-03-05
7
1.1 (0.043) 0.9 (0.035)
LO R971, LY R971
Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501)
250 C
OHLA0685
Tmax = 245 C
T
200
T = 183 C
t = 70 s
150 2-3 K/s 100 2-3 K/s 50
0 0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 min 5:30
t
2001-03-05
8
LO R971, LY R971
Empfohlenes Lotpaddesign Recommended Solder Pad IR Reflow Loten IR Reflow Soldering
1.2 (0.047)
0.9 (0.035)
1.2 (0.047)
OHAPY607
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Gurtung / Polaritat und Lage Verpackungseinheit 4000/Rolle, o180 mm Method of Taping / Polarity and Orientation Packing unit 4000/reel, o180 mm
Processive direction 1.5 (0.059) 4 (0.157) C 2 (0.079)
1.2 (0.047)
1.75 (0.069)
8 (0.315)
A
1.6 (0.063) Cathode mark 4 (0.157)
(2.4 (0.094))
3.5 (0.138)
OHAY0530
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2001-03-05
9
LO R971, LY R971
Revision History: 2001-03-05 Previous Version: Page 2001-03-05 Subjects (major changes since last revision)
Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2001-03-05
10

▲Up To Search▲

Price & Availability of LOR971

	To Download LOR971 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .